FixVault
Home › Ford › 2006 › Ranger 2D Pickup, 2.3 D, Automatic › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Electronic Engine Control System › Removal And Installation › Powertrain Control Module (PCM) › Removal

Powertrain Control Module (PCM): Removal

    NOTE: Any powertrain control module (PCM) replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION .
  2. Remove the PCM wiring harness retainer nut.
  3. Loosen the bolt and remove the PCM connector.
  4. Remove the stud bolt. Position the ground cable and PCM wiring harness aside.
  5. Remove the 2 nuts and the PCM cover.
  6. Remove the PCM.
About FixVault