FixVault
Home › Ford › 2006 › Taurus SEL, 3.0 U › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Driven Sprocket Support › Disassembly

Driven Sprocket Support: Disassembly

  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    Fig 1: Locating Teflon® Seal Rings
    G04710122Courtesy of FORD MOTOR CO.
  2. Inspect the driven sprocket bearing for damage. If damage is indicated, install a new driven sprocket.
    Fig 2: Locating Driven Sprocket Bearing
    G04710123Courtesy of FORD MOTOR CO.
About FixVault