Handles, Locks, Latches And Entry System

VEHICLE SECURITY MODULE (VSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Perform Test
B106E	Solid State Driver Disabled Due to Short Circuit	REPAIR all other DTCs. CLEAR the DTCs. REPEAT the self-test.
B106F	Module Disabled Due to External Fault	REPAIR all other DTCs. CLEAR the DTCs. REPEAT the self-test. If all other DTCs have been repaired and DTC B106F is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article.
B1217	Horn Relay Coil Circuit Failure	Go to Pinpoint Test D .
B1218	Horn Relay Coil Circuit Short to Vbatt	Go to Pinpoint Test D .
B1300	Power Door Lock Circuit Failure	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B1310	Power Door Unlock Circuit Failure	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B1311	Power Door Unlock Circuit Open	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B1396	Power Door Lock Circuit Short To Battery	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B1982	Driver's Door Unlock Relay Circuit Failure	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B1983	Driver's Door Unlock Relay Circuit Short to Battery	CLEAR the DTCs. REPEAT the continuous and on-demand self-tests. If DTC B1300 is still present, INSTALL a new VSM. REFER to MULTIFUNCTION ELECTRONIC MODULES article. PROGRAM all the RKE transmitters. CLEAR the DTCs. REPEAT the continuous and on-demand self-tests.
B2276	Less Than 2 Transmitters Programmed	PROGRAM the remote transmitters. REFER to Remote Keyless Entry Transmitter Programming in this article.
B2425	Remote Keyless Entry Out of Synchronization	Go to Pinpoint Test I .
B2574	Drivers Door LOCK Switch Short to Ground	Go to Pinpoint Test F .
B2575	Drivers Door UNLOCK Switch Short to Ground	Go to Pinpoint Test F .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	Go to Pinpoint Test E .
U2023	Fault Received From External Node	U2023 is set when a module receives invalid network data from another module with a faulted input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs.
All other DTCs	-	REFER to MULTIFUNCTION ELECTRONIC MODULES article.