Oil Cooler: Removal
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
- Drain the cooling system. For additional information, refer to ENGINE COOLING .
- Remove the LH catalytic converter. For additional information, refer to EXHAUST SYSTEM .
- Disconnect the 2 coolant hoses from the oil cooler.
- Remove the 6 bolts and the oil cooler.
- Discard the gaskets.
- Inspect the oil cooler.
- Clean and inspect all sealing surfaces.
CAUTION:
If metal or aluminum material is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may cause engine failure. To diagnose mechanical concerns, refer to ENGINE SYSTEM - GENERAL INFORMATION
.