FixVault
Home › Ford › 2007 › Edge SEL Plus, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › In-Vehicle Servicing › Transaxle Filler Tube › Installation

Transaxle Filler Tube: Installation

  1. Install the fluid filler tube and the nut.
    • Tighten to 11 Nm (8 lb-ft).
    2. Fig 1: Identifying Transmission Fluid Filler Tube
    GF0031643Courtesy of FORD MOTOR CO.
  2. Install the transmission fluid level indicator.
    3. Fig 2: Identifying Transmission Fluid Level Indicator
    GF0031642Courtesy of FORD MOTOR CO.
  3. Route the coolant hoses in the transmission fluid filler tube.
    4. Fig 3: Identifying Coolant Hoses From Transmission Fluid Filler Tube
    GF0031641Courtesy of FORD MOTOR CO.
About FixVault