Window Glass - Liftgate: Removal

WARNING: Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.

WARNING: Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result in serious personal injury.

Remove the liftgate window wiper arm and motor. For additional information, refer to WIPERS AND WASHERS .
Remove the liftgate spoiler. For additional information, refer to EXTERIOR TRIM AND ORNAMENTATION .
Remove the liftgate trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
Disconnect the 2 liftgate window defrost electrical connectors.

NOTE: Lubricate the existing urethane adhesive with water to aid the special tool while cutting.

Using the special tool, place the flat side of the knife against the liftgate window glass. Start cutting the adhesive away from the liftgate window glass at the top and work toward the corners.
Using the special tool, distance the liftgate window glass from the body.

Fig 1: Distance The Liftgate Window Glass From Body Using Special Tool (164-R2450)

Courtesy of FORD MOTOR CO.

Using the special tool, cut the remaining urethane adhesive and remove the liftgate window glass.

Fig 2: Cutting Remaining Urethane Adhesive & Removing Liftgate Window Glass Using Special Tool (164-R2459)

Courtesy of FORD MOTOR CO.

Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.

Fig 3: Measuring Urethane With Appropriate Tool

Courtesy of FORD MOTOR CO.