FixVault
Home › Ford › 2007 › Escape Base, 3.0 1, FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Cd4E › Disassembly And Assembly Of Subassemblies › Torque Converter Housing › Assembly

Torque Converter Housing: Assembly

  1. Position a new differential lube tube in the torque converter housing.
    2. Fig 1: Differential Lube Tube
    GF0024951Courtesy of FORD MOTOR CO.
  2. Using the special tool, install the differential lube tube.
    3. Fig 2: Installing Differential Lube Tube Using Special Tools
    GF0024954Courtesy of FORD MOTOR CO.
  3. Install the differential lube tube bolt.
    • Tighten to 13 Nm (10 lb-ft).
    4. Fig 3: Differential Lube Tube Bolt
    GF0024950Courtesy of FORD MOTOR CO.
    NOTE: The final drive ring gear is installed with the lug end up.
  4. Install the final drive ring gear.
    5. Fig 4: Final Drive Ring Gear
    GF0024948Courtesy of FORD MOTOR CO.
  5. Install the final drive ring gear retaining ring.
    6. Fig 5: Final Drive Ring Gear Retaining Ring
    GF0024947Courtesy of FORD MOTOR CO.
  6. Install the cooler tube fitting.
    • Tighten to 48 Nm (35 lb-ft).
    7. Fig 6: Cooler Tube Fitting
    GF0024946Courtesy of FORD MOTOR CO.
About FixVault