Engine Controls - Diagnostic Methods - (Hybrid)

• Diagnostic Methods
  • Overview
• Diagnostic Tools
• Scan Tool Set-up and Functionality
• Vehicle Check/Preparation
  • Notes
  • Visual Checks
  • Vehicle Preparation
• Quick Test Description
  • Quick Test
  • Key On Engine Off (KOEO) On-Demand Self-Test
  • Key On Engine Running (KOER) On-Demand Self-Test
    • Notes
    • Brake Pedal Position (BPP) Test
  • Continuous Memory Self-Test
• Clear The Continuous Diagnostic Trouble Codes (DTCs) And Reset The Emission Monitors Information In The Powertrain Control Module (PCM)
  • Description
• Resetting The Keep Alive Memory (KAM)
  • Description
• On-Board System Readiness (OSR) Test
  • Description
• Output State Control (OSC)
  • Description
• Output Test Mode (OTM)
  • Description
• Diagnostic Modes
  • Engine Cranking Diagnostic Mode
  • Engine Running Diagnostic Mode
• Parameter Identification (PID)
  • Description
  • Generic OBD PID List
  • Ford PCM PID List
  • Ford TCM PID List
• Freeze Frame Data
  • Emission-Related Freeze Frame Data
  • Non-Emission Related Freeze Frame Data
• Flash Electrically Erasable Programmable Read Only Memory (EEPROM)
  • Notes
  • Description
  • Programming the VID Block for a Replacement PCM
  • Making Changes to the VID Block
  • PCM Reprogramming
• Clear The Continuous Diagnostic Trouble Codes (DTCs) In The Transaxle Control Module (TCM)
  • Description
• Transaxle Control Module (TCM) Reprogramming
  • Notes
  • Description
  • Making Changes To The TCM Calibration
• Diagnostic Monitoring Test Results - Mode 6
• On Board Diagnostic (OBD) Drive Cycle
  • Description Of OBD Drive Cycle
  • Drive Cycles
• Intermittent Diagnostic Techniques
  • Notes
  • Recreating the Fault
  • Accumulating PCM Data
  • Peripheral Inputs
  • Comparing PCM Data
    • Notes
    • Analyzing PCM Data
• Adaptive Fuel Diagnostic Trouble Code (DTCs) Diagnostic Techniques