FixVault
Home › Ford › 2007 › Expedition RWD › Repair and Diagnosis › Electrical › Gauges › Information Center › General Procedures › Compass Calibration - With Message Center

Compass Calibration - With Message Center

    NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed.
  1. Start the vehicle.
  2. Press the message center SETUP button until RESET FOR CALIBRATION is displayed.
    3. NOTE: The message center displays CIRCLE SLOWLY TO CALIBRATE in the calibration function.
  3. Press the RESET control button to start the compass calibration function.
    4. NOTE: This step may require up to 5 circles to complete the calibration.
    NOTE: If the RESET button is pressed during the calibration or 3 minutes has elapsed since the beginning of the calibration without driving the vehicle, the message center reverts back to normal operation and the INFO displays CAL until a successful calibration is carried out.
  4. Slowly drive the vehicle in a circle less than 5 km/h (3 mph) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED.
About FixVault