FixVault
Home › Ford › 2007 › Focus ST › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Speed Control System › Removal And Installation › Speed Control Switch › Removal And Installation

Removal And Installation

  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
  2. Disconnect the speed control switch electrical connector.
    3. Fig 1: Locating Speed Control Switch Electrical Connector
    GF0040286Courtesy of FORD MOTOR CO.
  3. Remove the 4 screws and the speed control switches.
    • To install, tighten to 5 Nm (44 lb-in).
    4. Fig 2: Speed Control Switch Mounting Screws With Torque Specifications
    GF0040287Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
About FixVault