FixVault
Home › Ford › 2007 › Mustang Base, 2D Convertible, Automatic › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel System - General Information › General Procedures › Spring Lock Couplings › Connect

Spring Lock Couplings: Connect

    NOTE: Inspect and clean both the coupling ends. Lubricate the O-ring seals with clean engine oil.
  1. Connect the fuel tube to the spring lock coupling.
    • Pull on the spring lock coupling to make sure it is fully engaged.
    • Install the safety clip.
    2. Fig 1: Clean & Inspect Coupling Ends
    GF0001244Courtesy of FORD MOTOR CO.
About FixVault