FixVault
Home › Ford › 2007 › Mustang Base, 2D Convertible, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Main Control Valve Body › Disassembly

Main Control Valve Body: Disassembly

    NOTE: The valve body separator plate has a bonded gasket. Do not reuse. Discard the plate.
  1. Remove and discard the valve body separator plate.
    2. Fig 1: Locating Valve Body Separator Plate
    GF0015578Courtesy of FORD MOTOR CO.
  2. Remove the check balls.
    3. Fig 2: Locating Check Balls
    GF0015579Courtesy of FORD MOTOR CO.
    NOTE: Refer to the disassembled view.
  3. Disassemble the main control valve body only if cleaning is required.
About FixVault