FixVault
Home › Ford › 2007 › Ranger 2D Pickup, 2.3 D, Standard › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Electronic Engine Control System › Removal And Installation › Powertrain Control Module (PCM) › Removal

Powertrain Control Module (PCM): Removal

  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
  2. Remove the PCM wiring harness retainer nut.
  3. Remove the ground wire stud bolt.
  4. Disconnect the 3 PCM electrical connectors.
  5. Remove the 2 nuts and the PCM.
About FixVault