FixVault
Home › Ford › 2007 › Taurus SE › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems › General Procedures › Keyless Entry Keypad Code Programming

Keyless Entry Keypad Code Programming

NOTE: The system only allows 1 personal code to be programmed.
NOTE: Any existing personal code does not need to be erased to program a new one.
  1. Enter the permanent factory keyless entry keypad code.
  2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
  3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.
About FixVault