FixVault
Home › Ford › 2007 › Taurus SE › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine › Disassembly And Assembly Of Subassemblies › Piston › Assembly

Disassembly And Assembly Of Subassemblies: Piston: Assembly

  1. Lubricate the piston pin and piston pin bore with clean engine oil.
    2. NOTE: During assembly the small end of the connecting rod must be heated to 232°-316°C (450°-600°F).
  2. Using the special tool, press the piston pin into the piston and the connecting rod.
    3. Fig 1: Using Special Tool (303-S024) To Install Piston Pin
    GF0009276Courtesy of FORD MOTOR CO.
  3. Lubricate the piston and the new piston rings with clean engine oil.
  4. Install the piston rings onto the piston.
About FixVault