FixVault
Home › Ford › 2007 › Taurus SE › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Drive Sprocket/Turbine Shaft › Disassembly

Drive Sprocket/Turbine Shaft: Disassembly

  1. Remove the drive sprocket/turbine shaft seal and O-ring.
    • Remove the drive sprocket/turbine shaft O-ring.
    • Remove the drive sprocket/turbine shaft seal.
    2. Fig 1: Drive Sprocket/Turbine Shaft O-Ring & Seal
    GF0020296Courtesy of FORD MOTOR CO.
  2. Inspect the bearing race for wear. If the bearing is worn, a new drive sprocket/turbine shaft will need to be installed.
    3. Fig 2: Bearing Race
    GF0020297Courtesy of FORD MOTOR CO.
  3. Remove the turbine shaft front seal.
    4. Fig 3: Turbine Shaft Front Seal
    GF0020298Courtesy of FORD MOTOR CO.
About FixVault