FixVault
Home › Ford › 2007 › Taurus SE › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Driven Sprocket Support › Disassembly

Driven Sprocket Support: Disassembly

  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    2. Fig 1: Teflon(R) Seal Rings & No. 5 Thrust Washer
    GF0020290Courtesy of FORD MOTOR CO.
  2. Inspect the driven sprocket bearing for damage. If damage is indicated, install a new driven sprocket.
    3. Fig 2: Locating Driven Sprocket Bearing
    GF0020291Courtesy of FORD MOTOR CO.
About FixVault