FixVault
Home › Ford › 2007 › Taurus SEL › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Drive Sprocket/Turbine Shaft › Assembly

Drive Sprocket/Turbine Shaft: Assembly

  1. Make sure that the seals are mated correctly.
    2. Fig 1: Properly Aligned Seal Ends
    GF0020254Courtesy of FORD MOTOR CO.
  2. Install the drive sprocket/turbine shaft seal and O-ring.
    • Install the drive sprocket/turbine shaft O-ring.
    • Install the drive sprocket/turbine shaft seal.
    3. Fig 2: Drive Sprocket/Turbine Shaft O-Ring & Seal
    GF0020296Courtesy of FORD MOTOR CO.
  3. Install the turbine shaft front seal.
    4. Fig 3: Turbine Shaft Front Seal
    GF0020298Courtesy of FORD MOTOR CO.
  4. Make sure that the seal is locked correctly.
    5. Fig 4: Properly Locked Seal
    GF0020299Courtesy of FORD MOTOR CO.
About FixVault