Spring Lock Couplings: Connect

Inspect and clean the tube fitting, spring lock coupling and the O-ring seals.
- Lubricate the O-ring seals with clean engine oil.

Fig 1: Clean & Inspect Coupling Ends

Courtesy of FORD MOTOR CO.

NOTE: Make sure the spring lock coupling is completely seated and locked in place by pulling on the coupling.

Fig 2: Connecting Spring Lock Coupling Onto Tube Fitting

Courtesy of FORD MOTOR CO.

Fig 3: Installing Safety Clip

Courtesy of FORD MOTOR CO.

Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING & CABLES article.