FixVault
Home › Ford › 2008 › Crown Victoria Police Interceptor › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Intermediate One-Way Clutch › Assembly

Intermediate One-Way Clutch: Assembly

    NOTE: The intermediate OWC must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
  1. Install the intermediate OWC.
    1. Install the intermediate OWC.
    2. Install the snap ring.
    2. Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring
    GF0003618Courtesy of FORD MOTOR CO.
About FixVault