FixVault
Home › Ford › 2008 › Crown Victoria Police Interceptor › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Intermediate One-Way Clutch › Disassembly

Intermediate One-Way Clutch: Disassembly

    NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed. This is done for balancing purposes.
  1. Remove the intermediate one-way clutch (OWC).
    1. Remove the snap ring.
    2. Remove the intermediate OWC.
    2. Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring
    GF0003617Courtesy of FORD MOTOR CO.
About FixVault