Seat Cushion - Front: Notes
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
NOTE:
Driver seat shown in illustration, passenger similar.
NOTE:
A new heater mat will come assembled on a new foam pad.
| Item | Part Number | Description |
|---|---|---|
| 1 | 62901 | Cushion trim cover |
| 2 | 18D507 | Cushion climate control seat manifold (if equipped) |
| 3 | 632A23 | Cushion foam pad |
| 4 | - | Cushion heater mat (part of 632A23) |
| 5 | 63226 | Cushion support |
| 6 | - | Cushion thermo-electric device (TED)-to-climate control seat cushion adapter screw (if equipped) |
| 7 | 18D507 | Cushion TED adapter (if equipped) |
| 8 | 63100 | Cushion frame |
| 9 | 62294 | Recliner side shield screws |
| 10 | W714053 | Scrivet |
| 11 | 62187 | Recliner side shield |
| 12 | - | Safety belt buckle-to-seat track nut (part of 61203) |
| 13 | 61203 | Safety belt buckle |
| 14 | 18D507 | Cushion TED (if equipped) |
| 15 | W505945 | Cushion TED-to-cushion frame screw (3 required) (if equipped) |
| 16 | - | Screw grommet |
| 17 | - | Cushion frame-to-seat track rear brackets |
| 18 | - | Wire clip |
| 19 | 14A699 | Driver seat wire harness |
| 20 | 19E880 | Cushion TED filter (if equipped) |
| 21 | - | Seat track-to-cushion frame bolts (4 required) |
| 22 | 61711 | Power seat track assembly |
| 23 | 14B416 | Seat position sensor (driver only) |
| 24 | 62294 | Seat track cover retainer |
| 25 | 62187 | Seat track cover |
| 26 | 14A701 | Seat control switch |
| 27 | 62187 | Cushion side shield |
| 28 | 62294 | Cushion side shield retainer (3 required) |
| 29 | 14711 | Power lumbar switch knob (if equipped) |
| 30 | 14711 | Power seat recliner knob |
| 31 | 14711 | Seat control switch knob |
| 32 | 14C708 | Driver seat module (DSM) (if equipped) |
| 33 | 62294 | DSM-to-bracket screw (2 required) (if equipped) |
| 34 | 62294 | Bracket-to-seat track screws (if equipped) |
| 35 | 14A301 | DSM bracket (if equipped) |
NOTE:
A new heater mat will come assembled on a new foam pad.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Cushion heater mat (part of 632A23) (if equipped) |
| 2 | 62901 | Cushion trim cover |
| 3 | 632A23 | Cushion foam pad |
| 4 | 63100 | Cushion frame |
| 5 | - | Wire clip |
| 6 | 62294 | Recliner side shield screws |
| 7 | - | Recliner side shield |
| 8 | 14A699 | Driver seat wire harness |
| 9 | - | Safety belt buckle-to-seat track bolt (part of 61203) (manual driver seat track only) |
| 10 | 61203 | Safety belt buckle |
| 11 | 61711 | Manual seat track assembly |
| 12 | - | Seat track-to-cushion frame bolts (4 required) |
| 13 | 14B416 | Seat track position sensor |
| 14 | 610C01 | Manual lumbar adjuster (if equipped) |
| 15 | 62294 | Manual lumbar adjuster-to-seat track screw (if equipped) |
| 16 | - | Manual lumbar cable (if equipped) |
| 17 | 62187 | Cushion side shield |
| 18 | 62294 | Cushion side shield retainer (4 required) |
| 19 | - | Manual recliner handle spring clip |
| 20 | 61737 | Manual recliner handle |
| 21 | 61737 | Manual height adjust handle (if equipped) |
| 22 | 617B70 | Manual lumbar adjust handle (if equipped) |
NOTE:
A new heater mat will come assembled on a new foam pad.
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 | Cushion trim cover |
| 2 | - | Cushion heater mat (part of 632A22) (if equipped) |
| 3 | 632A22 | Cushion foam pad |
| 4 | 63100 | Cushion frame |
| 5 | 61736 | Manual recliner handle |
| 6 | - | Manual recliner handle cover spring clip |
| 7 | 62294 | Cushion side shield screw (4 required) |
| 8 | 62186 | Cushion side shield |
| 9 | 14A698 | Passenger seat wire harness |
| 10 | - | Grommet |
| 11 | - | Screw |
| 12 | 14C724 | Heated seat module (if equipped) |
| 13 | 62294 | Recliner side shield screws |
| 14 | 62187 | Recliner side shield |
| 15 | 61202 | Safety belt buckle |
| 16 | W520113 | Safety belt buckle nut |
| 17 | 61704 | Manual seat track assembly |
| 18 | - | Seat track-to-cushion frame bolts (4 required) |
NOTE:
To install a new occupant classification system module (OCSM) or an occupant classification sensor (OCS) weight sensor bolt, refer to the appropriate procedure in SUPPLEMENTAL RESTRAINT SYSTEM
article.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Power seat track adjuster assembly (part of 61710) |
| 2 | 63100 | Occupant classification sensor (OCS) weight sensor bolt nuts (4 required) |
| 3 | 62294 | Cushion side shield bracket screws |
| 4 | 14A301 | Cushion side shield bracket |
| 5 | 62294 | Occupant classification system module (OCSM) retainers |
| 6 | 14B422 | OCSM |
| 7 | - | Seat track front cross brace nuts (part of 61710) |
| 8 | - | Seat track front cross brace (part of 61710) |
| 9 | 14A301 | Bracket (with dual climate controlled seat module [DCSM]) (if equipped) |
| 10 | 62294 | Bracket screws |
| 11 | - | Heated seat module screw (if equipped) |
| 12 | 14C724 | Heated seat module (if equipped) |
| 13 | 14A301 | Bracket (with heated seat module) (if equipped) |
| 14 | 62294 | DCSM retainers (if equipped) |
| 15 | 14C724 | DCSM (if equipped) |
| 16 | 62294 | Outboard OCS weight sensor bolt protection bracket screws |
| 17 | - | Outboard OCS weight sensor bolt protection bracket |
| 18 | - | Inboard OCS weight sensor bolt protection bracket |
| 19 | 62294 | Inboard OCS weight sensor bolt protection bracket screw |
| 20 | 12655 | OCS weight sensor bolt retaining clips (4 required) |
| 21 | 12656 | OCS weight sensor bolt spring washers (4 required) |
| 22 | 14B422 | OCS weight sensor bolts (4 required) (part of 61710) |
| 23 | - | Inboard seat track rail (part of 61710) |
| 24 | - | Outboard seat track rail (part of 61710) |
| 25 | 62294 | Seat track cover retainer |
| 26 | 62186 | Seat track cover |