FixVault
Home › Ford › 2008 › Escape Base, 3.0 1, FWD › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems › General Procedures › Keyless Entry Keypad Code Programming › Erasing the Personal Codes

Erasing the Personal Codes

  1. Enter the permanent factory keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad and release.
  3. Within 5 seconds, press and hold the 1/2 button on the keypad for 2 seconds.
  4. All personal codes are now erased and only the permanent factory keyless entry keypad code will work.
About FixVault