FixVault
Home › Ford › 2009 › Edge SE, AWD › Repair and Diagnosis › External Pages › Different car › Section 1759 (Anti-Lock Brake System - Vehicle Dynamic Systems) › Diagnosis And Testing › Anti-Lock Control - Traction Control And Stability Assist › Pinpoint Tests › Pinpoint Test T › Code Description

Code Description

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The Traction Control System Cannot Be Disabled/Enabled or the Traction Control System is Inoperative

The traction control switch provides the driver with the ability to turn the traction control system off. When the switch is pressed the stability/traction control indicator "sliding-car icon" in the Instrument Panel Cluster (IPC) will illuminate steadily, indicating that the system is off. Pressing the switch will only disable the traction control system. The Electronic Stability Control (ESC) and Roll Stability Control (RSC®) systems (if equipped) cannot be switched off.

The traction control switch is connected to the IPC  along circuit CCA15 (YE/GY). Ground is provided to the switch along circuit GD114 (BK/BU). When pressed, the switch will close, providing a ground signal to the IPC  . The IPC  will send a message over the High Speed Controller Area Network (HS-CAN) bus indicating that the driver has switched traction control system off.

This pinpoint test is intended to diagnose the following: 

About FixVault