FixVault
Home › Ford › 2009 › Edge SE, FWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Piston Pin Bore Diameter

Piston Pin Bore Diameter

NOTE: Refer to the appropriate Engine article for the specification.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
    Fig 1: Measuring Piston Pin Bore Diameter
    G06064074Courtesy of FORD MOTOR CO.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
About FixVault