FixVault

Symptom Chart - Brake System

SYMPTOM CHART - BRAKE SYSTEM

Condition Possible Sources Action
  • The red brake warning indicator and the yellow ABS warning indicator are illuminated
  • DTCs in the ABS module
  • The red brake warning indicator is always/never on
  • Brake fluid level switch
  • Parking brake switch
  • Wiring, terminals or connectors
  • Instrument cluster
  • Smart junction box (SJB)
  • The brakes pull or drift
  • Tires
  • INSPECT the tires for uneven or excessive wear, and correct inflation. REFER to WHEELS AND TIRES article.
-
  • Brake pads
  • INSPECT the brake pads for contamination, uneven taper or excessive wear, REFER to Brake Pads.
-
  • Brake discs
-
  • Brake calipers and/or guide pins
  • INSPECT the brake calipers and guide pins, REFER to Brake Calipers and Brake Caliper Guide Pins.
-
  • Suspension component and/or wheel alignment
  • Brake pedal goes down fast
  • Brake fluid leaks and/or air in the system
  • INSPECT the system for leaks. REPAIR as necessary. FILL the brake master cylinder reservoir. BLEED the system. REFER to BRAKE SYSTEM BLEEDING .
-
  • Brake master cylinder
-
  • Hydraulic control unit (HCU)
  • The brake pedal eases down slowly
  • Air in the system
-
  • Brake master cylinder
-
  • HCU
  • Brakes lock up under light brake pedal force
  • Brake pads
  • INSPECT the brake pads for uneven taper or excessive wear, REFER to Brake Pads.
-
  • Brake calipers and/or guide pins
  • INSPECT the brake calipers and guide pins, REFER to Brake Calipers and Brake Caliper Guide Pins.
-
  • Anti-lock brake control system
  • Excessive/erratic brake pedal travel
  • Brake fluid leaks and/or air in the system
-
  • Brake calipers and/or guide pins
  • INSPECT the brake calipers and guide pins, REFER to Brake Calipers and Brake Caliper Guide Pins.
-
  • Brake flexible hose
  • INSPECT the brake flexible hoses for swelling and damage. INSTALL new as necessary. REFER to FRONT DISC BRAKE article for front disc brakes or REAR DISC BRAKE article for rear disc brakes.
-
  • Brake master cylinder
-
  • Brake pads
  • INSPECT the brake pads for taper wear, REFER to Brake Pads.
-
  • Brake pedal
  • INSPECT the brake pedal for binding, obstructions and correct installation. REPAIR as necessary. CHECK the brake pedal fasteners for correct torque. REFER to Specifications in HYDRAULIC BRAKE ACTUATION article.
-
  • Anti-lock brake control system
  • Brakes drag
  • Parking brake component
-
  • Brake caliper guide pins
  • INSPECT the caliper guide pins for correct operation. INSTALL new components as necessary. REFER to Brake Caliper Guide Pins.
-
  • Disc brake caliper(s)
  • INSPECT the brake calipers. REFER to Brake Calipers. REPAIR or INSTALL new brake calipers as necessary. REFER to FRONT DISC BRAKE article for front disc brakes or REAR DISC BRAKE article for rear disc brakes.
-
  • Brake booster
-
  • Brake master cylinder
  • Excessive brake pedal effort
  • Insufficient engine vacuum for brake booster operation
-
  • Brake booster manifold vacuum hose
  • VERIFY engine vacuum at the booster. REROUTE, REPAIR or INSTALL new components as necessary.
-
  • Brake booster
  • VERIFY engine vacuum at the booster. CARRY OUT the Brake Booster test in COMPONENT TESTS .
-
  • Brake booster check valve
  • VERIFY engine vacuum at the booster. CARRY OUT the Check Valve test in COMPONENT TESTS .