FixVault
Home › Ford › 2009 › Focus S, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › In-Vehicle Servicing › Transaxle Support Insulator › Removal

Transaxle Support Insulator: Removal

  1. Remove the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Remove the 3 battery tray nuts. Pull the battery tray up, disconnect the wiring harness fasteners from the battery tray and remove the battery tray.
    3. Fig 1: Identifying Battery Tray Nuts And Wiring Harness Fasteners
    GF0043336Courtesy of FORD MOTOR CO.
  3. Install the Engine Support Bar and Adapters and support the engine.
    4. Fig 2: Identifying Engine Support Bar And Adapters
    GF0039749Courtesy of FORD MOTOR CO.
  4. Remove the transaxle support bolt and nuts and remove the transaxle support insulator.
    5. Fig 3: Identifying Transaxle Support Insulator Bolt And Nuts
    GF0043337Courtesy of FORD MOTOR CO.
About FixVault