FixVault

Torque Specifications

TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Battery tray bolt 9 - 80
Battery tray nut 9 - 80
Ground strap bolt 25 18 -
Intermediate shaft speed sensor bolt 10 - 89
Line pressure port plug 8 - 71
Line pressure switch 13 - 115
Main control valve bodya - - -
Main control valve body wiring harness ground wire 9 - 80
Manual control lever nut 22 16 -
Output Shaft Speed (OSS) sensor bolt 10 - 89
Pipe thread adapter 12 - 106
Power steering tube bracket bolts 9 - 80
Roll restrictor bracket bolts 90 66 -
Selector lever cable bracket bolts 20 - 177
Shift solenoid wiring harness ground wire bolt 9 - 80
Shift solenoids 9 - 80
Shift solenoids brackets 9 - 80
Solenoid body cover bolts 7 - 62
Starter B+ cable 12 - 106
Starter bolts 35 26 -
Starter solenoid terminal 5 - 44
Steering gear 107 79 -
Subframe nuts 150 111 -
Subframe support bracket bolts 103 76 -
Sway bar links 40 30 -
Torque converter housing bolts 47 35 -
Torque converter housing bracket nut 25 18 -
Torque converter nuts 37 27 -
Transmission Control Module (TCM) nuts 10 - 89
Transmission fluid pan drain plug 29 21 -
Transmission fluid pan bolts 7 - 62
Transmission Range (TR) sensor bolts 10 - 89
Transmission test plate bolts 10 - 89
Transaxle side cover bolts 7 - 62
Transaxle support insulator bracket bolts 62 46 -
Transaxle support insulator bracket bolts 90 66 -
Transaxle support insulator bracket nut 80 59 -
Transaxle support insulator frame bolts 62 46 -
Turbine Shaft Speed (TSS) sensor bolt 10 - 89

a Specific tightening sequence is required. See the appropriate procedure.