FixVault
Home › Ford › 2009 › Taurus Limited, FWD › Repair and Diagnosis › External Pages › Different car › Section 1304 (Interior Lighting System) › Removal And Installation › Ambient Lighting Module › Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
    NOTE: The ambient lighting module is mounted under the bottom of the floor console finish panel cup holder.
  2. Remove the 2 screws and the ambient lighting module.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
About FixVault