FixVault
Home › Ford › 2009 › Taurus SE › Repair and Diagnosis › External Pages › Different car › Section 1284 (Electronic Engine Control) › Removal And Installation › Throttle Position (TP) Sensor › Removal

Throttle Position (TP) Sensor: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the throttle position (TP) sensor electrical connector.
    2. CAUTION: Failure to remove the TP sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high-speed driver to complete the removal.
  2. Remove and discard the 2 screws and the TP sensor.
About FixVault