Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Edge only

Pull the switch bezel straight up to unclip it from the door trim panel.

MKX only

NOTE: LH front shown, all others similar.

Pull up on the front edge of the switch bezel and pull forward to unhook it from the door trim panel.

Fig 1: Pulling Up On Front Edge Of Switch Bezel & Pulling Forward To Unhook It From Door Trim Panel

Courtesy of FORD MOTOR CO.

All vehicles

Disconnect the electrical connector(s).
Unclip the window control switch from the switch bezel.
To install, reverse the removal procedure.