Torque Specifications
WARNING: This page is about a different car, the 2009 Mercury Mountaineer, 2009 Ford Explorer Sport Trac, and 2009 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C charging valve cap | 0.8 | - | 7 |
| A/C clutch disc and hub bolt | 14 | 10 | - |
| A/C compressor bolt | 25 | 18 | - |
| A/C compressor fitting nuts | 15 | 11 | - |
| A/C compressor nuts | 25 | 18 | - |
| A/C compressor pressure relief valve | 10 | - | 89 |
| A/C compressor studs (4.0L) | 4 | - | 35 |
| A/C compressor studs (4.6L) | 14 | 10 | - |
| A/C line bracket nut at dash panel | 6 | - | 53 |
| Compressor-to-condenser discharge line bracket nut (4.0L) | 7 | - | 62 |
| Compressor-to-condenser discharge line bracket nut (4.6L) | 9 | - | 80 |
| Condenser bolts | 12 | 9 | - |
| Condenser fitting nuts | 8 | - | 71 |
| Condenser-to-evaporator line bracket nut | 7 | - | 62 |
| Coolant bottle bolts | 9 | - | 80 |
| Coolant expansion tank bolts | 7 | - | 62 |
| Cooling module bolts | 12 | 9 | - |
| Dash panel A/C line bracket nut | 11 | 8 | - |
| Evaporator core orifice access fitting | 18 | 13 | - |
| Fender splash shield A/C line bracket nut | 11 | 8 | - |
| Heater core and evaporator core housing nuts | 9 | - | 80 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-side service port stem bracket bolt | 11 | 8 | - |
| Suction accumulator bolt | 11 | 8 | - |
| Suction accumulator fitting nuts | 8 | - | 71 |
| Suction accumulator stud | 11 | 8 | - |
| Suction accumulator-to- compressor line bracket bolt | 11 | 8 | - |
| Suction accumulator-to- compressor line bracket nut | 7 | - | 62 |
| Suction accumulator-to- compressor line middle fitting nut | 8 | - | 71 |