Smart Junction Box (SJB) DTC List

DTC	Description	Action
B106C	Tire Pressure Monitor System (TPMS ) Low Frequency Subsystem Fault	DISREGARD the DTC. It is not applicable to this vehicle. The Smart Junction Box (SJB) may be incorrectly configured or the SJB may be at fault. CHECK the configuration of the SJB . CLEAR the DTCs. REPEAT the self-test. REFER to MODULE CONFIGURATION .
B106E	Solid State Driver Disabled Due to Short Circuit	GO to PINPOINT TEST A .
B106F	Module Disabled Due to External Fault	GO to PINPOINT TEST A .
B1317	Battery Voltage High	GO to PINPOINT TEST B .
B1318	Battery Voltage Low	GO to PINPOINT TEST C .
B1342	ECU is Faulted	CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new SJB . REFER to SMART JUNCTION BOX (SJB) . TEST the system for normal operation.
B2477	Module Configuration Failure	REFER to MODULE CONFIGURATION .
C2780	ECU in Manufacturer Sub-State	NOTE: If DTC B2477 is also present, refer to the Action for DTC B2477 in this DTC chart. This DTC is only present when a new SJB is installed, or the SJB is configured. REFER to WHEELS & TIRES to carry out the Tire Pressure Monitoring System (TPMS) Sensor Training, then CARRY OUT the SJB self-test to clear this DTC.
P062F	Internal Control Module EEPROM Error	CLEAR the DTCs. REPEAT the self-test. If DTC P062F is retrieved again, INSTALL a new SJB . REFER to SMART JUNCTION BOX (SJB) .
U0155	Lost Communication With Instrument Panel Cluster (IC ) Control Module	GO to PINPOINT TEST D .
U2050	No Application Present	CONFIGURE the SJB . REFER to MODULE CONFIGURATION . CLEAR the DTCs. REPEAT the self-test. If DTC U2050 is retrieved again, INSTALL a new SJB . REFER to SMART JUNCTION BOX (SJB) . TEST the system for normal operation.
U2473	Unexpected Vehicle Speed (VSS )	Sets during the self-test if the vehicle speed exceeds 5 km/h (3 mph), or if the vehicle speed cannot be determined.
All other DTCs	-	REFER to DIAGNOSTIC TROUBLE CODE (DTC) CHART .