FixVault
Home › Ford › 2010 › Fusion S, Automatic › Repair and Diagnosis › Engine Performance › System › Fuel Charging System & Fuel Control System - 2.5L (Except Hybrid) › Removal And Installation › Fuel Pump Control Module › Removal and Installation

Removal and Installation

  1. Position aside the LR quarter panel luggage compartment trim.
  2. Disconnect the Fuel Pump (FP) control module electrical connector.
  3. Remove the 2 pin-type retainers and the FP  control module.
  4. To install, reverse the removal procedure.
About FixVault