FixVault
Home › Ford › 2010 › Fusion S, Standard › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Flywheel Inspection

Flywheel Inspection

  1. Inspect the flywheel for:
    1. any cracks.
    2. worn ring gear teeth.
    3. chipped or cracked ring gear teeth.
    4. scratches, nicks and discoloration.
    NOTE: The flywheel cannot be resurfaced, it must be replaced.
    Fig 1: Inspecting Flywheel
    G06167890Courtesy of FORD MOTOR CO.
About FixVault