FixVault
Home › Ford › 2010 › Taurus Limited, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Automatic Transaxle/Transmission › In-Vehicle Repair › Transaxle Filler Tube › Installation

Transaxle Filler Tube: Installation

  1. NOTE: Coolant hoses removed for clarity.

    Install the transaxle filler tube and the nut.

    • Tighten to 11 Nm (97 lb-in).
    Fig 1: Locating Transaxle Filler Tube And Nut
    G06068006Courtesy of FORD MOTOR CO.
  2. NOTE: Coolant hoses removed for clarity.

    Install the transmission fluid level indicator.

    Fig 2: Locating Transmission Fluid Level Indicator
    G06068007Courtesy of FORD MOTOR CO.
  3. Route the coolant hoses to their position on the transaxle filler tube.
    Fig 3: Locating Coolant Hoses
    G06260224Courtesy of FORD MOTOR CO.
About FixVault