FixVault
Home › Ford › 2010 › Transit Connect Van Cargo › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Automatic Transaxle/Transmission › In-Vehicle Repair › Transaxle Support Insulator › Removal

Transaxle Support Insulator: Removal

  1. Remove the battery and battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Install the Engine Support Bar, Engine Lifting Bracket and Adapters and support the engine.
    Fig 1: Supporting Engine
    G06292846Courtesy of FORD MOTOR CO.
  3. Remove the transaxle support insulator nuts and remove the transaxle support insulator.
    Fig 2: Locating Transaxle Support Insulator Nuts
    G06292847Courtesy of FORD MOTOR CO.
About FixVault