Symptom Chart

SYMPTOM CHART

Condition	Possible Sources	Action
No communication with the ABS module	Fuse Wiring, terminals or connectors ABS module	REFER to MODULE COMMUNICATIONS NETWORK to diagnose the no communication problem.
The ABS warning indicator is always/never on	DTCs present in the ABS module	RETRIEVE and RECORD the ABS module DTCs. GO to the ABS MODULE DTC CHART .
The ABS warning indicator is always/never on	Wiring, terminals or connectors Instrument Cluster (IC)	REFER to INSTRUMENTATION AND WARNING CHIMES to diagnose the ABS warning indicator.
The traction control indicator is never/always on	DTCs present in the ABS module	CARRY OUT the ABS module self-test. RETRIEVE and RECORD the ABS module DTCs. GO to the ABS MODULE DTC CHART .
The traction control indicator is never/always on	Wiring, terminals or connectors IC	REFER to INSTRUMENTATION AND WARNING CHIMES to diagnose the traction control indicator.
The traction control system is inoperative	DTCs present in the IC	CARRY OUT the IC self-test. RETRIEVE and RECORD the IC DTCs. GO to the Instrument Cluster (IC) DTC Chart in INSTRUMENT CLUSTER AND PANEL ILLUMINATION .
	DTCs present in the ABS module	CARRY OUT the ABS module self-test. RETRIEVE and RECORD the ABS module DTCs. GO to the ABS MODULE DTC CHART .
	DTCs present in the PCM	CARRY OUT the PCM self-test. RETRIEVE and RECORD the PCM DTCs. GO to the INTRODUCTION - GASOLINE MODELS .
	High Speed Controller Area Network (HS-CAN) bus	REFER to MODULE COMMUNICATIONS NETWORK to diagnose the no communication concern.
	Incorrect PCM configuration	RECONFIGURE the PCM using as-built data. REFER to Programmable Module Installation (PMI) Using the Integrated Diagnostic System (IDS) When the Original Module is NOT Available in MODULE CONFIGURATION .