FixVault
Home › Ford › 2011 › Crown Victoria Base, 4.6 W › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems › General Procedures › Keyless Entry Keypad Code Programming › Erasing the Personal Keyless Entry Keypad Codes

Erasing the Personal Keyless Entry Keypad Codes

  1. Enter the factory set keyless entry keypad code.
  2. Within 5 seconds, press and release the 1/2 button.
  3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
  4. The personal codes are now erased and only the factory set code will work.
About FixVault