Component testing procedure
IGNITION LIGHT SWITCH - COMPONENTS TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | |
|---|---|---|---|
| Run power circuit | 8 and 3 | Lock | Open circuit |
| 8 and 6 | Accessory | Open circuit | |
| 8 and 7 | Run | Closed circuit | |
| Start | Open circuit | ||
| Run/Start power circuit | 8 and 3 | Lock | Open circuit |
| 9 and 1 | Accessory | Open circuit | |
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/Acc power circuit | 8 and 3 | Lock | Open circuit |
| 9 and 5 | Accessory | Closed circuit | |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Start power circuit | 8 and 3 | Lock | Open circuit |
| 9 and 10 | Accessory | Open circuit | |
| Run | Open circuit | ||
| Start | Closed circuit | ||
| Key-in-ignition | 8 and 3 | Key out of ignition | Open circuit |
| Key in ignition | Closed circuit |