Power Point: Removal

NOTE: Power point cover may differ depending on location.

Open the power point cover.
Install the Power Point Socket Remover in one of the power point socket slots.

Fig 1: Identifying Power Point Socket Remover (501-039)
Courtesy of FORD MOTOR CO.
Position the Power Point Socket Remover so that it engages in the adjacent slot.

Fig 2: Identifying Power Point Socket Remover (501-039)
Courtesy of FORD MOTOR CO.
Using the Power Point Socket Remover, pull the power point socket out of the retainer.

Fig 3: Identifying Power Point Socket Remover
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.