Selector Lever - Paddle Shift

Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
NOTE: Rotate the steering wheel to access the top 2 screws.

Remove the 3 steering wheel switch trim bezel screws.

Fig 1: Locating Steering Wheel Switch Trim Bezel Screws
Courtesy of FORD MOTOR CO.
Disconnect the steering wheel switch electrical connectors.
Remove the steering wheel switch trim.

Fig 2: Locating Steering Wheel Switch Trim
Courtesy of FORD MOTOR CO.
NOTE: RH side shown in the illustration, LH side similar.

Remove the paddle shifter.
1. Disconnect the paddle shifter.
2. Remove the 2 bolts and the paddle shifter.
- To install, tighten to 5 Nm (44 lb-in).
Fig 3: Identifying Paddle Shifter And Mounting Bolts
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.