FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F50 › Repair and Diagnosis (Single Page) › Engine Mechanical › Fuel System › Fuel Charging System & Fuel Control System - 3.5L Ti-VCT › Removal And Installation › Fuel Pump Control Module › Installation

Fuel Pump Control Module: Installation

  1. Install the Fuel Pump (FP) control module.
  2. Install the 2 Fuel Pump (FP) control module retaining nuts.

    Tighten to 6 Nm (53 lb-in).

  3. Connect the Fuel Pump (FP) control module electrical connector.
  4. Install the Right Hand (RH) C-pillar trim panel REFER to C-PILLAR TRIM PANEL - WITH INFLATABLE SAFETY BELTS or REFER to C-PILLAR TRIM PANEL - WITHOUT INFLATABLE SAFETY BELTS .
About FixVault