FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F55 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems - With Intelligent Access (IA) › General Procedures › Auto-Unlock Programming › Programming the Auto-Unlock Feature Using the Message Center

Programming the Auto-Unlock Feature Using the Message Center

  1. With all the vehicle doors closed, place the ignition in the ON mode.
    2. NOTE: Refer to the Owner's Manual for a complete list of the message center menus.
  2. Access the locks menu within the setup menu in the message center.
  3. Select auto-unlock and use the left and right arrows to enable or disable the feature.
About FixVault