FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F55 › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seating - 1ST Row › Removal And Installation › Driver Seat Module (DSM) › Installation

Driver Seat Module (DSM): Installation

  1. Connect the Driver Seat Module (DSM) electrical connectors.
  2. Position the Driver Seat Module (DSM) and install the 2 screws.
    3. NOTE: This step is necessary only if the Driver Seat Module (DSM) is being replaced.
  3. Programmable Module Installation (PMI) is required when installing a new Driver Seat Module (DSM). Refer to the scan tool instructions to carry out Programmable Module Installation (PMI).
About FixVault