FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F55 › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seating - 1ST Row › Removal And Installation › Driver Seat Module (DSM) › Removal

Driver Seat Module (DSM): Removal

NOTE: Prior to the replacement of the module, it is necessary to upload the module configuration information to the appropriate scan tool. This information must be downloaded into the new module after installation.
    NOTE: This step is necessary only if the Driver Seat Module (DSM) is being replaced.
  1. Programmable Module Installation (PMI) is required when installing a new Driver Seat Module (DSM). Refer to the scan tool instructions to carry out Programmable Module Installation (PMI).
  2. Position the front driver seat all the way back and up to access the Driver Seat Module (DSM).
  3. Remove the 2 screws.
  4. Disconnect the electrical connectors and remove the Driver Seat Module (DSM).
About FixVault