FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F55 › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seating - 1ST Row › Removal And Installation › Dual Climate Controlled Seat Module (DCSM) › Installation

Dual Climate Controlled Seat Module (DCSM): Installation

  1. Install the Dual Climate Controlled Seat Module (DCSM) in the following sequence.
    • Connect the electrical connectors.
    • Secure the locking wedges on the 2 Dual Climate Controlled Seat Module (DCSM) electrical connectors.
    • Position the Dual Climate Controlled Seat Module (DCSM) and install the screws.
    2. NOTE: This step is necessary only if the Dual Climate Controlled Seat Module (DCSM) is being replaced.
  2. Programmable Module Installation (PMI) is required when installing a new Dual Climate Controlled Seat Module (DCSM). Refer to the scan tool instructions to carry out Programmable Module Installation (PMI).
About FixVault