FixVault
Home › Ford › 2011 › Explorer Base, AWD, 6F55 › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Abs) And Stability Control › Removal And Installation › Anti-Lock Brake System (ABS) Module › Installation

Anti-Lock Brake System (ABS) Module: Installation

    NOTE: Visually inspect the Anti-Lock Brake System (ABS) module terminals for damage before installation.
  1. Install the Anti-Lock Brake System (ABS) module and the 4 Anti-Lock Brake System (ABS) module screws.

    Tighten to 2 Nm (18 lb-in)  .

  2. Install the Hydraulic Control Unit (HCU). REFER to HYDRAULIC CONTROL UNIT (HCU) .
About FixVault