Start-Stop Switch

The start/stop switch is a momentary contact switch that is hardwired to the Remote Function Actuator (RFA) module, Body Control Module (BCM), and Powertrain Control Module (PCM). When the switch is pressed, it signals the Remote Function Actuator (RFA) module, Body Control Module (BCM) and Powertrain Control Module (PCM) that there is a request to either switch the ignition on or start the engine. The start/stop switch is connected to both modules as a backup in case of a failure. If there is a circuit failure to either module from the start/stop switch, the modules communicate the start/stop switch request to each other over the Medium Speed Controller Area Network (MS-CAN).