Spark Plugs: Installation
- Adjust the spark plug gap as necessary.
1.25 mm (0.0492 in) - 1.35 mm (0.0531 in).
- Install the 6 spark plugs.
Tighten to 15 Nm (133 lb-in) .
- Install the 6 ignition coil-on-plugs. REFER to IGNITION COIL-ON-PLUG - LH and/or REFER to IGNITION COIL-ON-PLUG - RH .
NOTE:
Only use hand tools when removing or installing the spark plugs or damage can occur to the cylinder head or spark plug.
NOTE:
The spark plug procedure must be followed exactly or damage to the cylinder head and spark plug will result.